Please make sure to download the latest firmware file for Mini Wireless Motion to your computer now as you will lose internet access in the next few steps : Downloads page.
With the device off, keep the button pressed until the LED lights up red.
Make sure the LED is continuously red. If it isn't, your device booted in normal mode and you'll need to shut it down and retry.
Quick side note : exiting safe mode
If you wish to cancel the firmware update and resume as usual, simply press the button for a few seconds. The LED will dim down and the device will shut down.
Connect to WiFi network
Click on the wireless signal icon in the lower right of your Windows desktop. Then select the Motion WiFi network and connect to it.
From this point on, you will lose internet access. If you need to come back to this documentation or any other website, you will need to disconnect from Motion and reconnect to your regular WiFi network.
Connect to the website
Click here or copy/paste http://192.168.0.1/ to your web browser address bar to access your device's website.
You can now upload the new firmware by clicking on "Choose File" then "Confirm".
The website will first display "Loading, please wait". It could take up to two minutes.
Upon success, the website will display "Success, Motion will restart", the device's LED will turn green and the device will restart in normal mode. Do not forget to shut it down!
If it fails, please simply retry it first. If it keeps on failing, please email email@example.com. Do not worry, the device is not bricked and the previous firmware is still loaded.